HEAD-TO-HEAD EQUIPMENT SHOWDOWN

CaseIH Magnum 325 vs Fendt 728 Vario

Specification differential, power-to-weight analysis, hydraulic benchmarks, and equipment decision guidance.

Different Measurement ProtocolsMeasurement standard or power basis is unspecified for one or both machines.
CaseIH

CaseIH Magnum 325

Category: Farm • Production: 2025 -

CaseIH Magnum 325
TRACTORCOMPARE.COM
Power383 HP
Weight28,800lbs
Pump FlowN/Agpm
Fendt

Fendt 728 Vario

Category: Farm • Production: 2023 -

Fendt 728 Vario
TRACTORCOMPARE.COM
Power296.4 HP
Weight21,275lbs
Pump Flow31.7gpm

Decisive Performance Differentials

  • CaseIH Magnum 325 provides +7,525 lbs more unballasted traction mass

Multi-Axis Capability Radar

Normalized 5-pillar operational benchmark comparison

CaseIH Magnum 325
Fendt 728 Vario
Engine PowerBallast MassHydraulicsDisplacementGear Versatility
Engine PowerRated Horsepower
383 HPvs296.4 HP
Ballast MassOperating Weight
28,800 lbsvs21,275 lbs
HydraulicsStandard Flow
Option Pack Requiredvs31.7 gpm
DisplacementEngine Liters
8.7 Lvs7.5 L
Gear VersatilitySpeeds / Range
19F / 4RvsCVT / Standard

Head-to-Head Specification Differential

Side-by-side technical parameters with calculated delta advantage & percent differentials

SpecificationCaseIH Magnum 325Fendt 728 VarioAdvantage Delta
Power & Output
Rated Engine Horsepower
383 HP
296.4 HP
-
PTO Horsepower (Tested)
277 HP
N/A
-
Traction Density Ratio
13.3 HP/1k lbs
13.9 HP/1k lbs
13.9 vs 13.3 HP / 1,000 lb (higher transport agility)
Dimensions & Weight
Base Operating Weight
28,800 lbs
21,275 lbs
+35.4%+7,525 lbs heavier
Engine Specs
Displacement
8.7 L
7.5 L
+1.2L larger displacement
Cylinders
6 Cylinders
6 Cylinders
-
Hydraulics & Implements
Standard Hydraulic Pump Flow
N/A (Check Option Pack)
31.7 gpm
-
Rear SCV Remotes (Standard)
5 Valves
1 Valves
+4 extra standard remote circuits
3-Point Hitch Category
Category III/IIIN
Category II
-
Chassis & Drivetrain
Drive Configuration
4WD
4WD
-
Transmission System
full power shift
continuously-variable transmission
-
✓Specifications independently cross-referenced with official OECD & Nebraska test codes.
Official Engineering Test Reports

Buyer Decision Export Tools

Export side-by-side data for forums, Excel spreadsheets, or dealer negotiations

AI MATCHUP ARBITER & FIELD WORKLOAD ADVISOR

Operational Field Verdict Matrix

Algorithmic suitability assessment cross-referencing Nebraska draft tests against four agricultural workloads.

Real-time Engineering Synthesis

Primary Tillage & Deep Chisel Plowing

CaseIH Recommended

CaseIH delivers higher base frame ballast (+7,525 lbs) to minimize tire wheel slip under deep draft implement drag.

Tractive efficiency in heavy soil depends heavily on static axle load rather than pure unballasted horsepower.

Large-Scale Air Seeding & Hydraulic Drills

Data Inconclusive

Dedicated remote circuit hydraulic flow ratings are incomplete. Direct comparative seeding capacity requires dealer-verified option build sheets.

Variable-rate air carts require independent remote valve pressure regulation without starving steering hydraulics.

Road Hauling & Grain Cart Chase Duty

Fendt Recommended

Fendt 728 Vario offers superior 13.93 HP/1,000 lb agility, reducing road fuel overhead on rapid grain bin transit cycles.

Higher agility power-to-weight ratios dramatically improve turnaround times during peak harvesting windows.

Soil Compaction & Wet Ground Flotation

Fendt Recommended

Fendt 728 Vario features a lighter footprint (-7,525 lbs), mitigating subsoil compaction and preserving soil porosity.

Preserving soil porosity and preventing hardpan buildup saves diesel fuel in subsequent years.
Fleet Manager Recommendation

Both machines demonstrate balanced engineering trade-offs in this equipment class. Base final fleet acquisition on local dealer servicing support, operator ergonomics, and implement compatibility.

Evidence Coverage72%Empirical Spec Depth

Decision Analysis & Editorial Verdict

Engine Decision Verdict

Both CaseIH Magnum 325 and Fendt 728 Vario are remarkably well-matched within this power bracket. The decisive purchasing decision should focus on dealer proximity, local service network reputation, hydraulic circuit options, and implement hitch requirements.

COMMERCIAL INVENTORY & PRICING

Request Authorized Dealer Best Quote & Availability

Skip the runaround. Receive competitive manufacturer incentive packages, verified stock status, and freight estimates from top regional dealers.

100% Free service • No purchase obligation
Matched to certified OEM franchise dealers near your ZIP
Fast response with seasonal cash discount & low APR bundles

Your contact details are encrypted and only transmitted to authorized machinery dealers matching your location.

COMMERCIAL MACHINERY DECISION TOOL

Equipment Financing & Monthly Payment Estimator

Model cash flows, estimated installment burdens, and financing differentials for agricultural leases or loans.

Zero Credit Impact Estimate
$
Financed: $312,000 after down payment
$
Financed: $312,000 after down payment
Down Payment20%
0%20% (Standard)50%
Annual APR5.99%
Financing Term Duration (Months)
Estimated Monthly Payment Differential
CaseIH Magnum 325$6,030 /mo
60 payments$361,800 total
Fendt 728 Vario$6,030 /mo
60 payments$361,800 total
Estimated Monthly Delta:$0 /mo savings

*Indicative estimates based on standard Tier-1 agricultural commercial rates. Taxes, freight, attachments, and insurance not included.

Other Competitors in This Horsepower Tier

View All CaseIH Alternatives →
FendtFendt 728 Vario296.4 HP
Compare with Magnum 325 →
SteigerSteiger Panther III PTA-296296 HP
Compare with Magnum 325 →
ClaasClaas Axion 870295 HP
Compare with Magnum 325 →