HEAD-TO-HEAD EQUIPMENT SHOWDOWN

Claas Axion 810 (2006–2023) vs Deere 7215R

Specification differential, power-to-weight analysis, hydraulic benchmarks, and equipment decision guidance.

Different Measurement ProtocolsMeasurement standard or power basis is unspecified for one or both machines.
Claas

Claas Axion 810 (2006–2023)

Category: Farm

Claas Axion 810 (2006–2023)
TRACTORCOMPARE.COM
Power178 HP
Weight15,760lbs
Pump Flow29.06gpm
Deere
Spec Winner

Deere 7215R

Category: Farm

Deere 7215R
TRACTORCOMPARE.COM
Power237 HP
WeightN/Albs
Pump Flow35gpm

Decisive Performance Differentials

  • Deere 7215R provides +5.9 gpm higher base hydraulic flow (+20.3%)

Multi-Axis Capability Radar

Normalized 5-pillar operational benchmark comparison

Claas Axion 810 (2006–2023)
Deere 7215R
Engine PowerBallast MassHydraulicsDisplacementGear Versatility
Engine PowerRated Horsepower
178 HPvs237 HP
Ballast MassOperating Weight
15,760 lbsvsNo Record
HydraulicsStandard Flow
29.1 gpmvs35 gpm
DisplacementEngine Liters
6.8 Lvs6.8 L
Gear VersatilitySpeeds / Range
24F / 0Rvs20F / 0R
FIELD PROVEN FOOTAGE SHOOTOUT

Dual Field Action & Powertrain Sound

Side-by-side operational field footage verified with computer vision & acoustic audits.

VLM Visual & Audio Audited
Claas Axion 810 (2006–2023)
Claas Axion 810 Tractor
Claas Axion 810 Tractor
Channel: G.M. Stephenson LtdWatch on YouTube
Deere 7215R
Audited Laboratory Acoustic SpecDirect field recording is undergoing computer vision verification. Audited Nebraska decibel acoustic metrics available in the benchmark table.

Head-to-Head Specification Differential

Side-by-side technical parameters with calculated delta advantage & percent differentials

SpecificationClaas Axion 810 (2006–2023)Deere 7215RAdvantage Delta
Power & Output
Rated Engine Horsepower
178 HP
237 HP
-
PTO Horsepower (Tested)
N/A
216.3 HP
-
Traction Density Ratio
11.3 HP/1k lbs
N/A
-
Dimensions & Weight
Base Operating Weight
15,760 lbs
N/A
-
Engine Specs
Displacement
6.8 L
6.8 L
Tie
Cylinders
6 Cylinders
6 Cylinders
-
Hydraulics & Implements
Standard Hydraulic Pump Flow
29.1 gpm
35 gpm
+20.3%+5.9 gpm flow
Rear SCV Remotes (Standard)
3 Valves
Optional / Standard
-
3-Point Hitch Category
Standard Hitch
Category 3N (optional)
-
Chassis & Drivetrain
Drive Configuration
4WD
4WD
-
Transmission System
Mechanical / PowerShift
partial power shift
-
✓Specifications independently cross-referenced with official OECD & Nebraska test codes.
Official Engineering Test Reports

Buyer Decision Export Tools

Export side-by-side data for forums, Excel spreadsheets, or dealer negotiations

AI MATCHUP ARBITER & FIELD WORKLOAD ADVISOR

Operational Field Verdict Matrix

Algorithmic suitability assessment cross-referencing Nebraska draft tests against four agricultural workloads.

Real-time Engineering Synthesis

Primary Tillage & Deep Chisel Plowing

Data Inconclusive

Comparative draft ballast analysis is unavailable due to missing unballasted operating weight specifications on one or both tractors.

Tractive efficiency in heavy soil depends heavily on static axle load rather than pure unballasted horsepower.

Large-Scale Air Seeding & Hydraulic Drills

Deere Recommended

Deere leads with enhanced hydraulic pump capacity (35 gpm, +5.9 gpm advantage), preventing hydraulic oil overheating on wide vacuum seeders.

Variable-rate air carts require independent remote valve pressure regulation without starving steering hydraulics.

Road Hauling & Grain Cart Chase Duty

Data Inconclusive

Insufficient operating weight or horsepower records to compute comparative road transport traction agility.

Higher agility power-to-weight ratios dramatically improve turnaround times during peak harvesting windows.

Soil Compaction & Wet Ground Flotation

Data Inconclusive

Chassis weight data missing on one or both units; ground footprint contact pressure cannot be responsibly determined.

Preserving soil porosity and preventing hardpan buildup saves diesel fuel in subsequent years.
Fleet Manager Recommendation

Deere 7215R holds a verified rated horsepower lead (237 HP vs 178 HP). However, essential operating ballast or auxiliary hydraulic pump ratings remain unrecorded for a definitive overall workload recommendation. Consult OEM dealer build sheets before pairing with demanding implements.

Evidence Coverage65%Empirical Spec Depth

Decision Analysis & Editorial Verdict

Engine Decision Verdict

Deere 7215R holds the specification edge across verified benchmark criteria, led by higher rated horsepower. Consider 7215R for demanding high-capacity field duties, while Claas Axion 810 (2006–2023) provides a competitive footprint for alternative duty cycles.

COMMERCIAL INVENTORY & PRICING

Request Authorized Dealer Best Quote & Availability

Skip the runaround. Receive competitive manufacturer incentive packages, verified stock status, and freight estimates from top regional dealers.

100% Free service • No purchase obligation
Matched to certified OEM franchise dealers near your ZIP
Fast response with seasonal cash discount & low APR bundles

Your contact details are encrypted and only transmitted to authorized machinery dealers matching your location.

COMMERCIAL MACHINERY DECISION TOOL

Equipment Financing & Monthly Payment Estimator

Model cash flows, estimated installment burdens, and financing differentials for agricultural leases or loans.

Zero Credit Impact Estimate
$
Financed: $192,000 after down payment
$
Financed: $192,000 after down payment
Down Payment20%
0%20% (Standard)50%
Annual APR5.99%
Financing Term Duration (Months)
Estimated Monthly Payment Differential
Claas Axion 810 (2006–2023)$3,711 /mo
60 payments$222,660 total
Deere 7215R$3,711 /mo
60 payments$222,660 total
Estimated Monthly Delta:$0 /mo savings

*Indicative estimates based on standard Tier-1 agricultural commercial rates. Taxes, freight, attachments, and insurance not included.

Other Competitors in This Horsepower Tier

View All Claas Alternatives →
FendtFendt Favorit 614S135 HP
Compare with Axion 810 →
FendtFendt Favorit 614LS135 HP
Compare with Axion 810 →
Deutz-FahrDeutz-Fahr Agrotron 135135 HP
Compare with Axion 810 →