HEAD-TO-HEAD EQUIPMENT SHOWDOWN

Cameco 505 vs CaseIH Magnum 200

Specification differential, power-to-weight analysis, hydraulic benchmarks, and equipment decision guidance.

Different Measurement ProtocolsMeasurement standard or power basis is unspecified for one or both machines.
Cameco

Cameco 505

Category: Farm

Cameco 505
TRACTORCOMPARE.COM
Power325 HP
Weight28,050lbs
Pump FlowN/Agpm
CaseIH

CaseIH Magnum 200

Category: Farm • Production: 2014 -

CaseIH Magnum 200
TRACTORCOMPARE.COM
Power245 HP
Weight20,705lbs
Pump FlowN/Agpm

Decisive Performance Differentials

  • Cameco 505 provides +7,345 lbs more unballasted traction mass

Multi-Axis Capability Radar

Normalized 5-pillar operational benchmark comparison

Cameco 505
CaseIH Magnum 200
Engine PowerBallast MassHydraulicsDisplacementGear Versatility
Engine PowerRated Horsepower
325 HPvs245 HP
Ballast MassOperating Weight
28,050 lbsvs20,705 lbs
HydraulicsStandard Flow
Option Pack RequiredvsOption Pack Required
DisplacementEngine Liters
14.6 Lvs6.7 L
Gear VersatilitySpeeds / Range
10F / 2Rvs19F / 6R

Head-to-Head Specification Differential

Side-by-side technical parameters with calculated delta advantage & percent differentials

SpecificationCameco 505CaseIH Magnum 200Advantage Delta
Power & Output
Rated Engine Horsepower
325 HP
245 HP
-
PTO Horsepower (Tested)
N/A
192.7 HP
-
Traction Density Ratio
11.6 HP/1k lbs
11.8 HP/1k lbs
Tie
Dimensions & Weight
Base Operating Weight
28,050 lbs
20,705 lbs
+35.5%+7,345 lbs heavier
Engine Specs
Displacement
14.6 L
6.7 L
+7.9L larger displacement
Cylinders
6 Cylinders
6 Cylinders
-
Chassis & Drivetrain
Drive Configuration
4WD
4WD
-
Transmission System
power shift
full power shift
-
Hydraulics & Implements
Rear SCV Remotes (Standard)
Optional / Standard
3 Valves
-
3-Point Hitch Category
Standard Hitch
Category III/IIIN
-
✓Specifications independently cross-referenced with official OECD & Nebraska test codes.
Official Engineering Test Reports

Buyer Decision Export Tools

Export side-by-side data for forums, Excel spreadsheets, or dealer negotiations

AI MATCHUP ARBITER & FIELD WORKLOAD ADVISOR

Operational Field Verdict Matrix

Algorithmic suitability assessment cross-referencing Nebraska draft tests against four agricultural workloads.

Real-time Engineering Synthesis

Primary Tillage & Deep Chisel Plowing

Cameco Recommended

Cameco delivers higher base frame ballast (+7,345 lbs) to minimize tire wheel slip under deep draft implement drag.

Tractive efficiency in heavy soil depends heavily on static axle load rather than pure unballasted horsepower.

Large-Scale Air Seeding & Hydraulic Drills

Data Inconclusive

Dedicated remote circuit hydraulic flow ratings are incomplete. Direct comparative seeding capacity requires dealer-verified option build sheets.

Variable-rate air carts require independent remote valve pressure regulation without starving steering hydraulics.

Road Hauling & Grain Cart Chase Duty

Balanced Agility

Both tractors exhibit matched power-to-weight agility (11.59 vs 11.83 HP/1,000 lb).

Higher agility power-to-weight ratios dramatically improve turnaround times during peak harvesting windows.

Soil Compaction & Wet Ground Flotation

CaseIH Recommended

CaseIH Magnum 200 features a lighter footprint (-7,345 lbs), mitigating subsoil compaction and preserving soil porosity.

Preserving soil porosity and preventing hardpan buildup saves diesel fuel in subsequent years.
Fleet Manager Recommendation

Both machines demonstrate balanced engineering trade-offs in this equipment class. Base final fleet acquisition on local dealer servicing support, operator ergonomics, and implement compatibility.

Evidence Coverage72%Empirical Spec Depth

Decision Analysis & Editorial Verdict

Engine Decision Verdict

Both Cameco 505 and CaseIH Magnum 200 are remarkably well-matched within this power bracket. The decisive purchasing decision should focus on dealer proximity, local service network reputation, hydraulic circuit options, and implement hitch requirements.

COMMERCIAL INVENTORY & PRICING

Request Authorized Dealer Best Quote & Availability

Skip the runaround. Receive competitive manufacturer incentive packages, verified stock status, and freight estimates from top regional dealers.

100% Free service • No purchase obligation
Matched to certified OEM franchise dealers near your ZIP
Fast response with seasonal cash discount & low APR bundles

Your contact details are encrypted and only transmitted to authorized machinery dealers matching your location.

COMMERCIAL MACHINERY DECISION TOOL

Equipment Financing & Monthly Payment Estimator

Model cash flows, estimated installment burdens, and financing differentials for agricultural leases or loans.

Zero Credit Impact Estimate
$
Financed: $312,000 after down payment
$
Financed: $192,000 after down payment
Down Payment20%
0%20% (Standard)50%
Annual APR5.99%
Financing Term Duration (Months)
Estimated Monthly Payment Differential
Cameco 505$6,030 /mo
60 payments$361,800 total
CaseIH Magnum 200$3,711 /mo
60 payments$222,660 total
Estimated Monthly Delta:$2,319 /mo savings

*Indicative estimates based on standard Tier-1 agricultural commercial rates. Taxes, freight, attachments, and insurance not included.

Other Competitors in This Horsepower Tier

View All Cameco Alternatives →
ValtraValtra T234250 HP
Compare with 505 →
ValtraValtra T235250 HP
Compare with 505 →
AGCOAGCO DT225250 HP
Compare with 505 →