HEAD-TO-HEAD EQUIPMENT SHOWDOWN

Cameco 110-T vs Zetor 8520

Specification differential, power-to-weight analysis, hydraulic benchmarks, and equipment decision guidance.

Different Measurement ProtocolsMeasurement standard or power basis is unspecified for one or both machines.
Cameco

Cameco 110-T

Category: Farm

Cameco 110-T
TRACTORCOMPARE.COM
Power106 HP
Weight8,930lbs
Pump FlowN/Agpm
Zetor

Zetor 8520

Category: Farm

Zetor 8520
TRACTORCOMPARE.COM
Power80 HP
Weight7,441lbs
Pump Flow15.85gpm

Decisive Performance Differentials

  • Cameco 110-T provides +1,489 lbs more unballasted traction mass

Multi-Axis Capability Radar

Normalized 5-pillar operational benchmark comparison

Cameco 110-T
Zetor 8520
Engine PowerBallast MassHydraulicsDisplacementGear Versatility
Engine PowerRated Horsepower
106 HPvs80 HP
Ballast MassOperating Weight
8,930 lbsvs7,441 lbs
HydraulicsStandard Flow
Option Pack Requiredvs15.9 gpm
DisplacementEngine Liters
4.5 Lvs4.2 L
Gear VersatilitySpeeds / Range
5F / 3Rvs18F / 6R

Head-to-Head Specification Differential

Side-by-side technical parameters with calculated delta advantage & percent differentials

SpecificationCameco 110-TZetor 8520Advantage Delta
Power & Output
Rated Engine Horsepower
106 HP
80 HP
-
PTO Horsepower (Tested)
N/A
76 HP
-
Traction Density Ratio
11.9 HP/1k lbs
10.8 HP/1k lbs
11.9 vs 10.8 HP / 1,000 lb (higher transport agility)
Dimensions & Weight
Base Operating Weight
8,930 lbs
7,441 lbs
+20%+1,489 lbs heavier
Engine Specs
Displacement
4.5 L
4.2 L
+0.3L larger displacement
Cylinders
4 Cylinders
4 Cylinders
-
Hydraulics & Implements
Standard Hydraulic Pump Flow
N/A (Check Option Pack)
15.9 gpm
-
Rear SCV Remotes (Standard)
2 Valves
3 Valves
+1 extra standard remote circuits
3-Point Hitch Category
Category II (optional)
Category optional
-
Chassis & Drivetrain
Drive Configuration
4WD
2WD
-
Transmission System
power shift
synchromesh
-
✓Specifications independently cross-referenced with official OECD & Nebraska test codes.
Official Engineering Test Reports

Buyer Decision Export Tools

Export side-by-side data for forums, Excel spreadsheets, or dealer negotiations

AI MATCHUP ARBITER & FIELD WORKLOAD ADVISOR

Operational Field Verdict Matrix

Algorithmic suitability assessment cross-referencing Nebraska draft tests against four agricultural workloads.

Real-time Engineering Synthesis

Primary Tillage & Deep Chisel Plowing

Cameco Recommended

Cameco delivers higher base frame ballast (+1,489 lbs) to minimize tire wheel slip under deep draft implement drag.

Tractive efficiency in heavy soil depends heavily on static axle load rather than pure unballasted horsepower.

Large-Scale Air Seeding & Hydraulic Drills

Data Inconclusive

Dedicated remote circuit hydraulic flow ratings are incomplete. Direct comparative seeding capacity requires dealer-verified option build sheets.

Variable-rate air carts require independent remote valve pressure regulation without starving steering hydraulics.

Road Hauling & Grain Cart Chase Duty

Cameco Recommended

Cameco 110-T has a sharper 11.87 HP/1,000 lb power-to-weight ratio for rapid hill-climbing acceleration with loaded grain carts.

Higher agility power-to-weight ratios dramatically improve turnaround times during peak harvesting windows.

Soil Compaction & Wet Ground Flotation

Zetor Recommended

Zetor 8520 features a lighter footprint (-1,489 lbs), mitigating subsoil compaction and preserving soil porosity.

Preserving soil porosity and preventing hardpan buildup saves diesel fuel in subsequent years.
Fleet Manager Recommendation

Both machines demonstrate balanced engineering trade-offs in this equipment class. Base final fleet acquisition on local dealer servicing support, operator ergonomics, and implement compatibility.

Evidence Coverage72%Empirical Spec Depth

Decision Analysis & Editorial Verdict

Engine Decision Verdict

Both Cameco 110-T and Zetor 8520 are remarkably well-matched within this power bracket. The decisive purchasing decision should focus on dealer proximity, local service network reputation, hydraulic circuit options, and implement hitch requirements.

COMMERCIAL INVENTORY & PRICING

Request Authorized Dealer Best Quote & Availability

Skip the runaround. Receive competitive manufacturer incentive packages, verified stock status, and freight estimates from top regional dealers.

100% Free service • No purchase obligation
Matched to certified OEM franchise dealers near your ZIP
Fast response with seasonal cash discount & low APR bundles

Your contact details are encrypted and only transmitted to authorized machinery dealers matching your location.

COMMERCIAL MACHINERY DECISION TOOL

Equipment Financing & Monthly Payment Estimator

Model cash flows, estimated installment burdens, and financing differentials for agricultural leases or loans.

Zero Credit Impact Estimate
$
Financed: $108,000 after down payment
$
Financed: $60,000 after down payment
Down Payment20%
0%20% (Standard)50%
Annual APR5.99%
Financing Term Duration (Months)
Estimated Monthly Payment Differential
Cameco 110-T$2,087 /mo
60 payments$125,220 total
Zetor 8520$1,160 /mo
60 payments$69,600 total
Estimated Monthly Delta:$927 /mo savings

*Indicative estimates based on standard Tier-1 agricultural commercial rates. Taxes, freight, attachments, and insurance not included.

Other Competitors in This Horsepower Tier

View All Cameco Alternatives →
BenyeBenye 80480 HP
Compare with 110-T →
ZetorZetor 821180 HP
Compare with 110-T →
ZetorZetor 824580 HP
Compare with 110-T →